What is fuegocable?

The project is still in the alpha stage. For now, only the Presonus Firestudio Project interface has been successfully modified. Presonus FP10 and Focusrite Saffire (the white one) are the next in the workbench to be modified. More models will be added over time as they undergo reverse engineering.
fuegocable is an open-source project aimed at giving new life to FireWire audio interfaces. The project aims to provide documentation, tools, and hardware and software resources for modifying these interfaces to add USB connectivity, allowing them to be used with modern computers and other USB Audio Class-compatible hosts, including Windows, macOS, Linux, Android, iOS, and other platforms that provide appropriate USB Audio Class support. Presonus Firestudio Project is the first (and only for now) interface modified to work with USB in modern computers and more interfaces will be investigated in the future.
Many audio interfaces from previous generations offered Firewire as their primary or only computer connection. Some also provided digital connections such as ADAT or S/PDIF, but their main audio transport and configuration still depended on Firewire.
As described in How can firewire audio interfaces be used today?, there are several ways to keep these interfaces working with modern computers. However, they often involve legacy computers, specific Firewire PCI cards, Thunderbolt adapters, discontinued drivers, or older operating systems. These solutions can work, but they are not always practical, portable, or easy to reproduce.
fuegocable takes a different approach. Instead of adapting a modern computer to the old interface, the project focuses on modifying the interface itself. The basic idea is to replace or bypass its original main controller — the part responsible for communicating with the host computer and managing the digital audio connection between the computer and the interface's audio converters — and replace it with a modern controller capable of implementing USB Audio Class. You can learn more about how the mod works and the technical details of the approach.

This allows the existing audio hardware — including its converters, analog circuitry, and other components — to be reused while replacing the obsolete computer connection with a modern USB interface.
The exact modification depends on the architecture of each audio interface. Reverse engineering is therefore an important part of the project. This may involve identifying digital audio buses such as I2S or TDM, control interfaces such as I2C or SPI, GPIO connections, clock signals, and the way the original controller communicates with the rest of the hardware.
This website hosts the documentation needed to understand how the fuegocable mod works, the characteristics and limitations of the approach, and the guides for modifying interfaces supported by the project. In our Modding guides section you will find how to modify specific interfaces.
Because fuegocable is open source, the website also serves as a place to document the reverse-engineering process of interfaces that are not yet supported. Schematics, measurements, firmware, experiments, hardware designs, and practical experiences can all become part of the project.
The idea is that knowledge should not have to be rediscovered for every interface from scratch. Someone may reverse-engineer one interface today, someone else may recognize the same controller or architecture in another interface tomorrow, and together those pieces of knowledge can make the next modification considerably easier.
fuegocable is an attempt to build an open, community-driven body of knowledge around the hardware we already have — and to keep that hardware making music for many more years.